Free, no account, still being built: no guarantee that results are correct. Why free?

Compressibility factor (Z)

Z, density and molar volume of a real gas or gas mixture from Peng-Robinson and SRK, beside the ideal gas, with fugacity coefficients and departure functions one click deeper.

Gas

Components and mole fractions
Examples:

Hydrocarbons and gases: natural gas, refinery and petrochemical streams, also at high pressure.

Gas at 25.00 °C and 100 bar

Peng-Robinson
Compressibility factor Z0.8298
Density ρ77.992kg/m³
Molar volume0.20569L/mol
Ideal gas density64.715kg/m³Z = 1
Equation of stateZρ, kg/m³V, L/mol
Peng-Robinson0.829877.9920.20569
Soave-Redlich-Kwong0.866774.6720.21484
Ideal gas164.7150.2479

Fugacity and departure functions

Componentyφf, bar
Methane1.00000.8192881.928
H − Hig
−1.7812 kJ/mol
S − Sig
−4.317 J/(mol·K)
G − Gig
−0.49414 kJ/molEquals RT ln φ for a pure gas.

Reduced temperature Tr = 1.565, reduced pressure Pr = 2.174.

Component data

ComponentTb, °CTc, °CPc, barω
Methane74-82-8 · 16.04 g/mol · Tc from ChemSep−161.5−82.645.990.011

Measured constants come from the ChemSep databank (Kooijman and Taylor, Artistic License 2.0). A compound it does not list is estimated from its structure by the group methods named, and every such value is marked. The components API gives each value with its source.

Free, no account, still being built: no guarantee that results are correct. Why free?

How Z is calculated

The compressibility factor Z = PV/RT is the root of the cubic equation of state at the given temperature and pressure: the largest root for a gas, the smallest for a liquid, and the one with the lower Gibbs energy where both exist. Peng-Robinson (with the 1978 form of κ for ω above 0.491) and Soave-Redlich-Kwong use the critical temperature, critical pressure and acentric factor of each component. Mixtures follow the van der Waals one-fluid rules with kij = 0, which is close for hydrocarbons, nitrogen and methane, and less so for CO2 or H2S with hydrocarbons.

Volumes are the plain cubic roots, as in textbooks and the GPSA and API data books; the Péneloux volume shift that the flash drum uses for liquid densities is left out, so Z here is the Z of the equation itself. The departure functions are the residual enthalpy, entropy and Gibbs energy at the same temperature and pressure: what the real gas has more or less than the ideal gas.

Before the first flash, the mixture is tested for stability; if it splits, the phases are listed instead of a single Z.

Which equation to choose

Both are good for natural gas, refinery gases, nitrogen, oxygen and carbon dioxide away from the critical point; Peng-Robinson predicts liquid densities better and is the usual default. Neither is right for water, ammonia, alcohols or acids in the liquid; use an activity model in the flash drum for those.

Sources
  • D.-Y. Peng and D. B. Robinson, Ind. Eng. Chem. Fundam. 15 (1976) 59; D. B. Robinson and D.-Y. Peng, GPA Research Report RR-28 (1978).
  • G. Soave, Chem. Eng. Sci. 27 (1972) 1197.
  • The same flashes agree with Caleb Bell's thermo to 1 part in 1015 in Z, φ and the departure functions.

Report a problem

Marty, who builds Chempirical, reads every report. You need no account.

Tool
Compressibility factor (Z)
Page
Input
Errors
Build
Browser
System
Window
Theme

Free, no account, still being built: no guarantee that results are correct. Why free?