Aspen HYSYS compared with Retorta

What you needAspen HYSYSRetorta
PricePaid licence, price on requestFree
InstallationWindows programNone, runs in the browser
macOS, Linux, ChromebookNoYes
Steady-state flowsheets with recyclesYesYes
Dynamic simulationYesNo
Peng-Robinson and SRKYesYes
NRTL, UNIQUAC, Wilson and UNIFACYesYes
Steam tables (IAPWS-IF97)YesYes
Amine, sour water, electrolyte and glycol packagesYesNo
Oil assays and pseudo-componentsYesNo
Stirred-tank and plug-flow reactors with kineticsYesPower law and LHHW
Equilibrium (Gibbs) reactorYesYes
Rigorous distillation columns and absorbersYesYes
Shortcut column (Fenske, Underwood, Gilliland)YesYes
Adjust and Set blocks, optimiser, case studiesYesNo
Pipe hydraulics, exchanger rating, tray sizing, costingYesNo
Pure-component dataAspen Properties databanksChemSep, 643 compounds; others estimated
Stream table to ExcelYesYes
Share a flowsheet by linkNoYes

Aspen HYSYS does far more: dynamics, the oil and gas property packages and assays, hydraulics, equipment rating and costing, and its logic blocks and optimiser. Retorta covers the steady-state mass and energy balance of a plant with reactors, columns and recycles, for free on any computer.

What Retorta does differently

Nothing to install

Retorta runs in any modern browser on Windows, macOS, Linux or a Chromebook. The flowsheet is solved on your computer and reaches our server only when you keep it in your account or share a short link.

Solves as you draw

After the first solve every change is solved again, so a raised compressor pressure or another reflux ratio shows its effect on every stream at once. Streams snap only to ports that can take them, and what still keeps a flowsheet from solving is listed before you press Solve.

Kinetics as they are published

Power-law and Langmuir-Hinshelwood rate laws are typed in the units of the paper, per reactor volume or catalyst mass, into stirred-tank and plug-flow reactors with a coolant and a heat transfer coefficient.

Columns solved rigorously

Distillation columns and absorbers solve every stage's mass, equilibrium, summation and heat balance together (Naphtali-Sandholm), with a total, partial or decanter condenser and specifications such as reflux ratio, a product flow, a reboiler duty or a product purity.

Checked against references

Flashes agree with Caleb Bell's thermo, the steam tables with IAPWS-IF97, columns with ChemSep, and the vinyl acetate plant of Luyben and Tyréus solves to the published base case of Chen et al. (2003).

Common questions

What can I simulate with Retorta?

Steady-state processes from gas compression and refrigeration to a whole chemical plant: the vinyl acetate example has a kinetic plug-flow reactor, a feed-effluent exchanger, an absorber with a pumparound, carbon dioxide removal, a purge and an azeotropic column with a decanter, tied together by gas and liquid recycles.

Which thermodynamic data does it use?

Critical constants and temperature correlations from the ChemSep pure-component databank, binary parameters from our own fits to the NIST ThermoML archive and from published sets, each named with its source. A compound the databank lacks is estimated from its structure, and every estimate is marked.

Is my flowsheet uploaded?

No. It is solved in your browser. It reaches our server only when you keep it in your account or ask for a short link.

More comparisons

ChemDraw alternativeChemSketch alternativeMarvin alternativeMolSketch alternativeMestReNova alternativeSpectragryph alternative